The key thing is making sure the replacement laser fits into place.
Systems that use fiber-coupled lasers are easiest since the only thing
that matters is being able to plug in the fiber. You could duct-tape
the laser itself anywhere you want as long as the fiber can reach. We
have some systems that are free-space coupled, though, and this is
more complicated. The laser body has to be able to shoot the beam
into a steering box at the right height, angle, etc. which can be
tricky. It is possible, although slightly mechanically complicated,
to assemble a two-mirror periscope to steer a beam into a box at the
right angle, although you need room around your laser box to stick the
extra pieces of hardware.
Craig
On Mon, Jul 26, 2010 at 1:06 AM, Peter Pitrone <
[hidden email]> wrote:
> Hello Zhan,
>
> Point Source makes a good 25 mw 405 nm Diode Pumped Solid State laser that we have been using for the last year and a half with relatively no troubles. 5 years is a long time in relation to technical advances, so I wouldn't worry too much about not being able to get the same model. Good luck!
>
> Pete
>
>
> On Jul 24, 2010, at 10:10 AM, zhan cheng wrote:
>
>> Hello, everyone.
>> Our 405nm diode laser of the ZEISS LSM510 meta confocal need to be
>> change, It have run over 8000hrs during the past 5 years. I want to change
>> it by myself, because it will be much cheaper. But I can not buy the same
>> model as the old one. The laser company just don't sell it to others except
>> zeiss.
>> So is there anyone can tell me which kind of 405nm laser is suitble
>> for the zeiss lsm510 confocal? Thanks a lot if you can share your
>> experience.
>> zhan cheng
>> --
>> View this message in context:
http://confocal-microscopy-list.588098.n2.nabble.com/405-nm-laser-replacing-for-the-confocal-tp5332346p5332346.html>> Sent from the Confocal Microscopy List mailing list archive at Nabble.com.
>
Locked
