Andor IQ 3.x with Prior Proscan III

[Aryeh Weiss]

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
Post images on http://www.imgur.com and include the link in your posting.
*****

Is anyone using Andor IQ3 software with  a Prior  Proscan III controller
and XY stage?

If so, did you  need to purchase an extra software module to do it?

Thanks in advance for any info on this matter.
--aryeh

--
Aryeh Weiss
Faculty of Engineering
Bar Ilan University
Ramat Gan 52900 Israel

Ph:  972-3-5317638
FAX: [phone]

[Guy Hagen]

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
Post images on http://www.imgur.com and include the link in your posting.
*****

Dear Aryeh:

Briefly, yes and yes. There are 2 different software modules, one is meant
for 96 well plates (i think called multi-well), the other is meant for
montage type stuff (i think called multi-field). The modules are not super
expensive and I have been happy with multi-field.

-Guy Hagen

On Sun, Jul 15, 2018 at 6:20 AM, Aryeh Weiss <[hidden email]> wrote:

> *****
> To join, leave or search the confocal microscopy listserv, go to:
> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> Post images on http://www.imgur.com and include the link in your posting.
> *****
>
> Is anyone using Andor IQ3 software with  a Prior  Proscan III controller
> and XY stage?
>
> If so, did you  need to purchase an extra software module to do it?
>
> Thanks in advance for any info on this matter.
> --aryeh
>
> --
> Aryeh Weiss
> Faculty of Engineering
> Bar Ilan University
> Ramat Gan 52900 Israel
>
> Ph:  972-3-5317638
> FAX: [phone]
>

[Aryeh Weiss]

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
Post images on http://www.imgur.com and include the link in your posting.
*****

Dear Guy

Thank you for your quick reply. It is very helpful.
Do you use the multi-field with  hardware focus control (eg, ZDC for
Olympus or PFS for Nikon)?

--aryeh

On 15/07/2018 21:28, Guy Hagen wrote:

> Dear Aryeh:
>
> Briefly, yes and yes. There are 2 different software modules, one is
> meant for 96 well plates (i think called multi-well), the other is
> meant for montage type stuff (i think called multi-field). The modules
> are not super expensive and I have been happy with multi-field.
>
> -Guy Hagen
>
> On Sun, Jul 15, 2018 at 6:20 AM, Aryeh Weiss <[hidden email]
> <mailto:[hidden email]>> wrote:
>
>     *****
>     To join, leave or search the confocal microscopy listserv, go to:
>     http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
>     <http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy>
>     Post images on http://www.imgur.com and include the link in your
>     posting.
>     *****
>
>     Is anyone using Andor IQ3 software with  a Prior  Proscan III
>     controller and XY stage?
>
>     If so, did you  need to purchase an extra software module to do it?
>
>     Thanks in advance for any info on this matter.
>     --aryeh
>
>     --
>     Aryeh Weiss
>     Faculty of Engineering
>     Bar Ilan University
>     Ramat Gan 52900 Israel
>
>     Ph:  972-3-5317638
>     FAX: [phone]
>
>

--
Aryeh Weiss
Faculty of Engineering
Bar Ilan University
Ramat Gan 52900 Israel

Ph:  972-3-5317638
FAX: [phone]