FX mono camera on windows 10

classic Classic list List threaded Threaded
3 messages Options
F Javier Diez Guerra F Javier Diez Guerra
Reply | Threaded
Open this post in threaded view
|

FX mono camera on windows 10

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
Post images on http://www.imgur.com and include the link in your posting.
*****

Hello,

We are trying to assemble a widefield mic around an Axio200M stage and
Metamorph software.

For that, we have gathered several old devices that work OK but are
rather old. This is the case of a Photometrics CoolSnap FX monochrome
camera that talks to the PC through PVCAM driver and PCIe LVDS card
(from Photometrics).

We are having problems (slow communication and MM hangs) setting up the
camera in windows 10 Prof 64bit.

I wonder if anyone has faced a similar challenge and has found a solution.

Thanks

Javier


--
Fco. Javier Diez-Guerra, PhD

Servicio de Microscopía Confocal
Centro de Biologia Molecular Severo Ochoa
C/ Nicolás Cabrera, 1
Campus de Cantoblanco
28049 Madrid
SPAIN

Tel     +34 91 196 4612
e-mail: [hidden email]
samuel connell samuel connell
Reply | Threaded
Open this post in threaded view
|

Re: FX mono camera on windows 10

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
Post images on http://www.imgur.com and include the link in your posting.
*****

Hi Javier,

That LVDS board is only supported in Windows 7 64 bit.

https://www.photometrics.com/support/software-and-drivers

That likely isn't the answer you wanted but is likely the actual answer.

Kind Regards,
--
Sam


On Fri, Jul 24, 2020 at 4:29 AM F Javier Diez Guerra <[hidden email]>
wrote:

> *****
> To join, leave or search the confocal microscopy listserv, go to:
> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> Post images on http://www.imgur.com and include the link in your posting.
> *****
>
> Hello,
>
> We are trying to assemble a widefield mic around an Axio200M stage and
> Metamorph software.
>
> For that, we have gathered several old devices that work OK but are
> rather old. This is the case of a Photometrics CoolSnap FX monochrome
> camera that talks to the PC through PVCAM driver and PCIe LVDS card
> (from Photometrics).
>
> We are having problems (slow communication and MM hangs) setting up the
> camera in windows 10 Prof 64bit.
>
> I wonder if anyone has faced a similar challenge and has found a solution.
>
> Thanks
>
> Javier
>
>
> --
> Fco. Javier Diez-Guerra, PhD
>
> Servicio de Microscopía Confocal
> Centro de Biologia Molecular Severo Ochoa
> C/ Nicolás Cabrera, 1
> Campus de Cantoblanco
> 28049 Madrid
> SPAIN
>
> Tel     +34 91 196 4612
> e-mail: [hidden email]
>
Stephen Cody-2 Stephen Cody-2
Reply | Threaded
Open this post in threaded view
|

Re: FX mono camera on windows 10

In reply to this post by F Javier Diez Guerra
*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
Post images on http://www.imgur.com and include the link in your posting.
*****

Dear Javier,

One problem we identified with the older type photometrics cameras that use
that card, is that the card itself generates a lot of heat. If we used what
our IT people then called "grey boxes", computers assembled by local
computer shops, the computer would regularly crash without warning. It took
us ages to work out what was happening. The PC's CPU would get too hot and
switch itself off. Installing an extra cabinet fan fixed the problem. After
that most of the microscope vendors moved to suggesting HP workstations, at
the time HP had just moved over to compartmentalisation of their boxes to
improve heat management. This may not be your issue, but try it with the
side panels of your PC removed, to see if the problem improves.

All the best
Steve

On Fri, 24 Jul 2020 at 21:29, F Javier Diez Guerra <[hidden email]>
wrote:

> *****
> To join, leave or search the confocal microscopy listserv, go to:
> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> Post images on http://www.imgur.com and include the link in your posting.
> *****
>
> Hello,
>
> We are trying to assemble a widefield mic around an Axio200M stage and
> Metamorph software.
>
> For that, we have gathered several old devices that work OK but are
> rather old. This is the case of a Photometrics CoolSnap FX monochrome
> camera that talks to the PC through PVCAM driver and PCIe LVDS card
> (from Photometrics).
>
> We are having problems (slow communication and MM hangs) setting up the
> camera in windows 10 Prof 64bit.
>
> I wonder if anyone has faced a similar challenge and has found a solution.
>
> Thanks
>
> Javier
>
>
> --
> Fco. Javier Diez-Guerra, PhD
>
> Servicio de Microscopía Confocal
> Centro de Biologia Molecular Severo Ochoa
> C/ Nicolás Cabrera, 1
> Campus de Cantoblanco
> 28049 Madrid
> SPAIN
>
> Tel     +34 91 196 4612
> e-mail: [hidden email]
>


--
Stephen H. Cody