HI Steven,
Our LSM 510 has had a few issues, we purchased it almost two years ago.
WE are about to get the meta detector replaced as it has a fault also
there is a PCB that needs replacing that is affecting the gain
parameters. We also had a board replaced not long after we purchased
it. I too am not sure if Zeiss has an ongoing problem though none of
our issues has stopped us being able to use the instrument for all of
our standard work.
-----Original Message-----
From: Confocal Microscopy List [mailto:
[hidden email]]
On Behalf Of Steven Bourke
Sent: Wednesday, 9 September 2009 2:12 a.m.
To:
[hidden email]
Subject: LSM510 META Tubus PCB repair/replace
Afternoon all,
I hope you can be of help. The Zeiss LSM 510 Meta system which I work on
has ceased to work. I got in touch with Zeiss and sent them the Error
log which they have analyzed. They believe the problem to be at the
Tubus and in particular a couple of PCB's which seem not to be working
correctly.
Is this a common fault? Has anyone had them replaced or repaired in the
past? Could you suggest a reason for the fault. Seems quite strange that
a PCB would just fail. Is this a recurring problem that Zeiss may be
aware of?
Alas I do not have a service contract so I guessing I shall be having a
visit from one of the tech support engineers.
Thanks in advance
Steve
DISCLAIMER:
This email contains confidential information and may be legally privileged. If you are not the intended recipient or have received this email in error, please notify the sender immediately and destroy this email.
You may not use, disclose or copy this email or its attachments in any way.
Any opinions expressed in this email are those of the author and are not necessarily those of the Fonterra Co-operative Group.
http://www.fonterra.com/
Locked
