Re: -|EXT|- Re: Andor IQ 3.x with Prior Proscan III - [Vendor response]

[WAINWRIGHT James]

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
Post images on http://www.imgur.com and include the link in your posting.
*****

Hi Aryeh,

[Vendor Response]

As Guy says, there are two XY modules for iQ:

Multi-Well - this includes everything for XY control (multi-field and montage and hardware focus if the microscope is supported), including Multi-Well plate patterns.
Multi-Field - this allows for all XY control (multi-field and montage and hardware focus if the microscope is supported) except Multi-Well plates.

I will contact you off-list with your regional Sales Engineer, who can provide a quote for each of these.

Please let me know if you have any other questions,

Best wishes,

James


James Wainwright
Global Applications Specialist - Microscopy Systems

Tel:        [phone] ext. 2130
E-mail:   [hidden email]
Mob:     [phone]
Web:     https://www.andor.com/microscopy-systems



-----Original Message-----
From: Confocal Microscopy List [mailto:[hidden email]] On Behalf Of Aryeh Weiss
Sent: 15 July 2018 19:50
To: [hidden email]
Subject: -|EXT|- Re: Andor IQ 3.x with Prior Proscan III

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
Post images on http://www.imgur.com and include the link in your posting.
*****

Dear Guy

Thank you for your quick reply. It is very helpful.
Do you use the multi-field with  hardware focus control (eg, ZDC for Olympus or PFS for Nikon)?

--aryeh

On 15/07/2018 21:28, Guy Hagen wrote:

> Dear Aryeh:
>
> Briefly, yes and yes. There are 2 different software modules, one is
> meant for 96 well plates (i think called multi-well), the other is
> meant for montage type stuff (i think called multi-field). The modules
> are not super expensive and I have been happy with multi-field.
>
> -Guy Hagen
>
> On Sun, Jul 15, 2018 at 6:20 AM, Aryeh Weiss <[hidden email]
> <mailto:[hidden email]>> wrote:
>
>     *****
>     To join, leave or search the confocal microscopy listserv, go to:
>     http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
>     <http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy>
>     Post images on http://www.imgur.com and include the link in your
>     posting.
>     *****
>
>     Is anyone using Andor IQ3 software with  a Prior  Proscan III
>     controller and XY stage?
>
>     If so, did you  need to purchase an extra software module to do it?
>
>     Thanks in advance for any info on this matter.
>     --aryeh
>
>     --
>     Aryeh Weiss
>     Faculty of Engineering
>     Bar Ilan University
>     Ramat Gan 52900 Israel
>
>     Ph:  972-3-5317638
>     FAX: [phone]
>
>

--
Aryeh Weiss
Faculty of Engineering
Bar Ilan University
Ramat Gan 52900 Israel

Ph:  972-3-5317638
FAX: [phone]
___________________________________________________________________________
This e-mail is confidential and is for the addressee only.   Please refer to
www.oxinst.com/email-statement<http://www.oxinst.com/email-statement> for regulatory information.