Re: Zeiss SD

Posted by RICHARD BURRY on
URL: http://confocal-microscopy-list.275.s1.nabble.com/Zeiss-SD-tp2303456p2304637.html

Fred
We have a Visitech Infinity3 2D array scanning confocal.  It is based on the same principle as the spinning disk but use an array of pin holes.  This confocal allows seven different sizes of pin holes with diameter from 10 um to 60 um.  Our experience is that is gives great performance with a Hamamatsu EM13.  With the 100x 1.4 N.A. the optimal pin hole is 30 um but at 60 um the optical section thickness is a little more than a micron but the intensity is great for even weak fluorescence. 
Dick

----- Original Message -----
From: Fred Mast <[hidden email]>
Date: Tuesday, February 10, 2009 2:12 pm
Subject: Re: Zeiss SD
To: [hidden email]

> Does the CSU-X1 allow you to change the disks? I'm still waiting for a spinning-disk unit that is actually designed for live-cell imaging. The previous Yokogawa units were optimized for 100x 1,4 NA oil objectives if I'm not mistaken. Even with relatively thin samples (cultured cells), you're still introducing spherical aberration... By comparison, has anyone else looked at the technology being developed in Raphael Yuste's laboratory? They have combined multiphoton LSM with spatial light modulation technology to effectively "scan" an entire field at once. I'm not an expert in this but in my opinion if you could make it fast enough this seems like a better option to me (they report 60Hz calcium ion imaging). You can check it out here (under the SLM Microscopy section): > http://www.columbia.edu/cu/biology/faculty/yuste/methods.html > Cheers, > Fred > On 10-Feb-09, at 10:55 AM, G. Esteban Fernandez wrote: > I too was intrigued when I saw Zeiss roll out a spinning disk.  We're happy with our 5 LIVE.  Being able to vary the slit aperture size to match different objectives/samples is important in our multi-user facility.  It's also nice to capture two fluorescent channels simultaneously.  I wish the detector on the 5 LIVE were EM-CCD but the regular CCD does the job.  Images sometimes have vertical line artifacts but those are nicely dealt with by Fourier filtering or dividing by a blank image.  Must be lower cost (if that's true) and/or established familiarity of the spinning disk that makes them easy to sell.   > -Esteban > On Tue, Feb 10, 2009 at 10:35 AM, Simon Walker <<A href="javascript:main.compose('new','t=[e-mail]')">simon.walker@...> wrote: > I was interested to see that Zeiss have gone into partnership with Yokogawa > to launch their own flavour of the spinning disk confocal: > http://www.microscopy-analysis.com/news/carl-zeiss-and-yokogawa-launch- > spinning-disk-cell-observer-sd-2008 > Does this represent an acknowledgment that the 5-live doesn't do everything > it says on the tin, or just that it's too expensive?  Are there any happy 5-live > users out there? > -- > G. Esteban Fernandez, Ph.D. > Associate Director > Molecular Cytology Core Facility > University of Missouri > 120 Bond Life Sciences Center > Columbia, MO  65211 > http://www.biotech.missouri.edu/mcc/ > 573-882-4895 > 573-884-9395 fax > Fred D. Mast > Department of Cell Biology > Medical Sciences Building Room 5-14 > University of Alberta > Edmonton, Alberta, T6G 2H7 > Canada > Tel: [phone] <A href="javascript:main.compose('new','t=[e-mail]')">> fmast@... > Spam > Not spam > Forget previous vote

Richard W. Burry, Ph.D.
Department of Neuroscience, College of Medicine
Campus Microscopy and Imaging Facility, Director
The Ohio State University
Associate Editor, Journal of Histochemistry and Cytochemistry
277 Biomedical Research Tower
460 West Twelfth Avenue
Columbus, Ohio 43210
Voice 614.292.2814  Cell 614.638.3345  Fax [phone]