Re: How to measure objective transmission curves?

Posted by Rietdorf, Jens on
URL: http://confocal-microscopy-list.275.s1.nabble.com/How-to-measure-objective-transmission-curves-tp590172p590213.html

Search the CONFOCAL archive at
http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal

Dear Michael & Andy,

For Olympus lenses you can look it up on the web...the info for other
manufacturers lenses would be interesting though; do you plan to publish
the numbers? Andy, would you mind to disclose yours?

regards, jens
 
---
Dr. Jens Rietdorf
Head Microscopy
Novartis Research Foundation
Friedrich-Miescher-Institute, wro1066.2.32
Maulbeerstr.66, CH-4058 Basel, Switzerland
phone [phone] mobil [phone]
Email:rietdorf(at)fmi.ch

-----Original Message-----
From: Confocal Microscopy List [mailto:[hidden email]] On
Behalf Of Andrew Resnick
Sent: Freitag, 31. August 2007 17:00
To: [hidden email]
Subject: Re: How to measure objective transmission curves?

Search the CONFOCAL archive at
http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal

We've done similar measurements, it's not too difficult.

The main trick is handling the large NA lenses.  Our setup was light
source -> objective -> integrating sphere -> spectrometer.  After
normalizing to the source, we obtained really good data.  It's pretty
easy, actually.

Andy


At 08:45 AM 8/31/2007, you wrote:

>Search the CONFOCAL archive at
>http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal
>
>Dear all,
>
>one of the main differences of objectives is their transmission
>efficiency at certain wavelengths. One way to compare this is the
>trial-and-error method, however, this is not straight forward.
>
>My idea is to use a combination of spectrophotometer and a lamp with a
>more or less even spectra (i.e. Xenon) on some kind of optical bench.
>This would make the setup independent from the manufacturer.
>Beside the distance between the light source and the detector, there
>are obviously more things to consider: different diameter of the back
>focal plane, different focal lenghts...
>
>I would like to hear about your opinion about how to measure objective
>transmission. Have you ever done this in your lab? Did you find a setup

>that worked for you?
>
>cheers,
>Michael

Andrew Resnick, Ph. D.
Instructor
Department of Physiology and Biophysics
Case Western Reserve University
216-368-6899 (V)
216-368-4223 (F)