Posted by
David Burk on
URL: http://confocal-microscopy-list.275.s1.nabble.com/Bandpass-filter-kit-and-10-position-filter-wheel-tp590971p590974.html
Search the CONFOCAL archive at
http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocalJohn,
We got two of these critters when I was still at the LSU main campus:
http://www.tripplite.com/products/product.cfm?productID=1972 to fulfill
Leica's requirements to protect our SP2. We had horrible line
conditions that caused some hardware failures and these fixed the
problems. Kind of pricy though.
David
[hidden email]
-----Original Message-----
From: Confocal Microscopy List [mailto:
[hidden email]] On
Behalf Of J.P. Shields
Sent: Tuesday, November 27, 2007 3:09 PM
To:
[hidden email]
Subject: Line conditioners
Search the CONFOCAL archive at
http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocalHi,
I am having problems with fluctuating voltage since our physical plant
replaced the perfectly good transformer outside the building with a
"new"
version (my wife works at a transformer plant, so I know they don't go
bad
unless something catastrophic occurs). Since then I've had some pretty
good
spikes, surges, etc.. and most are correlated with increase/decrease of
student presence on campus. Our campus electrical experts and confocal
service engineer are better at pointing fingers than providing
solutions.
I feel better now. On to the important stuff.
I was hoping for some feedback on good line conditioners that would be
appropriate for a variety of imaging equipment. I realize that several
different configurations might be needed. We have a confocal and two
SEMs
affected. I suspect our eventual, new confocal will experience similar
difficulties.
Thanks in advance!
John Shields
EM Lab
University of Georgia
Athens, GA 30602
[hidden email]