Confocal Microscopy List

Re: A1

Posted by Stephen Cody on
URL: http://confocal-microscopy-list.275.s1.nabble.com/FW-A1-tp591961p591966.html

Search the CONFOCAL archive at http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal Search the CONFOCAL archive at http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal

David Knecht wrote

Ø ………Typically, you don't want the laser intensity to vary. …………

My reply is more of a question than a statement, can someone who has used the CLEM device please confirm.

Presumably if you have CLEM fitted to your confocal you can choose to turn it off for quantitative measurements of fluorescence. Turning it on only when required for long time-lapse experiments where reducing bleaching is paramount, and where you are interested primarily in morphology rather than pixel to pixel intensity. Can someone please confirm it is implemented this way on the A1?

Also there has not been in depth discussion of the “VAAS” detector. The conventional confocal detector collects a confocal image after the pinhole, but the light rejected by the pinhole is also collected by a detector. This signal can then be deconvolved with the confocal signal to produce an optical section with more signal compared to conventional confocal.

My question: Is this then equivalent to a deconvolved widefield image? Or is the confocal image used in some way to determine what the resulting deconvolved image should look like?

Cheers

Steve

Stephen H. Cody
Microscopy Manager
Central Resource for Advanced Microscopy
Ludwig Institute for Cancer Research
PO Box 2008 Royal Melbourne Hospital
Victoria, 3050
Australia
Tel: 61 3 9341 3155 Fax: 61 3 9341 3104
email: [hidden email]
www.ludwig.edu.au/labs/confocal.html
www.ludwig.edu.au/confocal

Tip: Learn how to receive reminders about you microscope booking:
www.ludwig.edu.au/confocal/Local/Booking_Hint.htm

-----Original Message-----
From: Confocal Microscopy List [mailto:[hidden email]] On Behalf Of David Knecht
Sent: Tuesday, 19 February 2008 2:51 AM
To: [hidden email]
Subject: Re: A1

The ability of using this system along with Controlled Light Exposure
Microscopy (CLEM) makes this system for long time live cell imaging and
confocal analysis. CLEM automatically monitors and varying the laser
illumination during time-lapse studies to reduce the risk of laser induced
bleaching, biochemical inconsistency and cell death.

Can you clarify what this means? I don't see how you can monitor the imaging and vary the laser in a way that can avoid cell toxicity. Typically, you don't want the laser intensity to vary. Do you have any quantitative data on cellular toxicity during imaging in comparison to a spinning disk system?

Dr. David Knecht

Department of Molecular and Cell Biology

Co-head Flow Cytometry and Confocal Microscopy Facility

U-3125

91 N. Eagleville Rd.

University of Connecticut

Storrs, CT 06269

860-486-2200

860-486-4331 (fax)

This communication is intended only for the named recipient and may contain information that is confidential, legally privileged or subject to copyright; the Ludwig Institute for Cancer Research does not waiver any rights if you have received this communication in error.
The views expressed in this communication are those of the sender and do not necessarily reflect the views of the Ludwig Institute for Cancer Research.