Re: Ask for help about LSM 510
Posted by
yee z on
URL: http://confocal-microscopy-list.275.s1.nabble.com/Ask-for-help-about-LSM-510-tp593440p593448.html
Search the CONFOCAL archive at
http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal
I did reboot the computer. It did not help.
It showed the same message again!
Almost cry!
And still can not find the reset button.
Is it possible that the software requires turning on the computer before LSM system?
One of old confocal system I used required such things.
If you ignite laser first, the software would not be opened.
The technician did not come today.
Hopefully he will come tomorrow.
From: Vickery Trinkaus-Randall <[hidden email]>
Subject: Re: Ask for help about LSM 510
To: [hidden email]
Date: Thursday, July 17, 2008, 6:16 PM
Search the CONFOCAL archive at
http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal
simple
I think that you may have been moving too quickly with pushing all of
your button!
make sure that it is connecting before you ask it to scan
Just exit and reboot and you will be fine!
Yi Zheng wrote:
>Search the CONFOCAL archive at
>http://listserv.acsu.buffalo.edu/cgi-bin/wa?S1=confocal
>
>Hi everyone!
>
>Here is an emergency.
>
>I am doing my data analysis on zeiss LSM 510 while the whole system is
>runing. I mean all laser are on and I was collecting data.
>
>The software was down suddenly.
>So I quit it and tried to restart it.
>Then I got the message like "Fail to connect to realtime controller.
If the
>system is running open the door "reset RTC" on the front of the
electronics
>rack. press the "Reset" button and wait 30 seconds.
>But the problem is I can not find any door or reset button behind it.
>
>I called Zeiss, but their system is down too!
>
>Is there anyone here can help?
>
>
>
>
|