Re: Cheap Antivibration table

Posted by R. Eric King on
URL: http://confocal-microscopy-list.275.s1.nabble.com/Olympus-ZDC-2-vs-Nikon-PFS-tp6370076p6559154.html

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
*****

Dear List,

There are some ideas in the Holography Handbook

http://search.barnesandnoble.com/Holography-Handbook/Fred-Unterseher/e/9780894960161

Thank you for your time, and

Best Regards,



R. Eric King
OEM & International Sales Manager

[hidden email]

www.LaserInnovations.com



LASER

     INNOVATIONS

1150 East Main Street
Santa Paula, CA 93060
[phone]
[phone] fax



www.CoherentLaser.com

www.244nm.com

www.337nm.com

www.355nm.com

www.488nm.com

www.532nm.com

www.Solidimaging.com

 

Confidentiality Notice: This message and any documents attached hereto will be considered confidential and the actual receipt of this correspondence alone acknowledges acceptance of Non-Disclosure which in itself contains information copy righted and/or protected by Laser Innovations.  They are intended for the sole use of the intended recipient.  Any review, reliance or distribution by others or forwarding without express written permission is strictly prohibited.  If you have received this transmission in error, please contact the sender and delete all copies.

 





----- Original Message -----
From: "Jeremy Adler" <[hidden email]>
To: <[hidden email]>
Sent: Thursday, July 07, 2011 2:22 AM
Subject: Cheap Antivibration table

> *****
> To join, leave or search the confocal microscopy listserv, go to:
> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> *****
>
> Has anyone every constructed a DIY air table by placing a bicycle  
> inner tube under a baseplate. It seems like a very simple and cheap  
> solution.
>
> Would it be worthwhile to use a stack of two inner tubes and  
> baseplates, with the inner tubes inflated to different pressures ?
>
> Any advice and alternative suggestions would be appreciated.
>
>
> Jeremy Adler
> IGP
> Rudbeckslaboratoriet
> Daghammersköljdsväg 20
> 751 85 Uppsala
> Sweden
>
> 0046 (0)18 471 4607
>