http://confocal-microscopy-list.275.s1.nabble.com/NIR-excitation-light-source-tp7386530p7387203.html
To drive an LED you need a 'constant current' supply. You can make simple
hacking then I'd recommend getting one of Thor's T-Cube drivers. The
LEDD1B is just under $300 USD and will drive an LED up to 1200mA. It's not
LED products. I think it would save you a lot of time and headache.
> *****
> To join, leave or search the confocal microscopy listserv, go to:
>
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy> *****
>
> Hello, Martin
>
> In addition to having a drawer of filter cubes, we will now have a drawer
> of LED's. Not a bad solution. Thank you, the prices are excellent but I
> need an electronics expert because these are just the raw components.
> Perhaps my nephew in his basement . . . . . . .
>
> Judy
>
>
> -----Original Message-----
> From: Confocal Microscopy List [mailto:
[hidden email]]
> On Behalf Of Martin Wessendorf
> Sent: Monday, March 19, 2012 1:46 PM
> To:
[hidden email]
> Subject: Re: NIR excitation light source
>
> *****
> To join, leave or search the confocal microscopy listserv, go to:
>
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy> *****
>
> Dear Judy--
>
> On 3/19/2012 12:30 PM, Judy Trogadis wrote:
>
> > Excluding lasers, does anyone know of a light source that would emit in
> NIR (around 800nm) wavelength with a good quantum efficiency? Are there
> other benchmarks to measure signal power?
>
> A conventional incandescent bulb is pretty good--I've used one for NIR
> DIC--but it really depends upon how much power you need.
>
> The following link (no commercial connection) lists NIR LEDs in the 800
> nm range; no idea of cost:
http://www.roithner-laser.com/led_diverse.html>
> Good luck!
>
> Martin
> --
> Martin Wessendorf, Ph.D. office: (612) 626-0145
> Assoc Prof, Dept Neuroscience lab: (612) 624-2991
> University of Minnesota Preferred FAX: (612) 624-8118
> 6-145 Jackson Hall, 321 Church St. SE Dept Fax: (612) 626-5009
> Minneapolis, MN 55455 e-mail:
[hidden email]
>