http://confocal-microscopy-list.275.s1.nabble.com/Removable-glue-for-optics-tp7578530p7578533.html
> *****
> To join, leave or search the confocal microscopy listserv, go to:
>
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy> *****
>
> rubber cement, two sided scotch tape, paraffin, dental wax, postit note
> folded so adhesive is on both sides, gelatin....
>
> On Mon, Jun 25, 2012 at 10:45 AM, Mark Cannell <
[hidden email]
> >wrote:
>
> > *****
> > To join, leave or search the confocal microscopy listserv, go to:
> >
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy> > *****
> >
> > Three thoughts:
> >
> > PVA blobs which can be peeled after setting or hot glue (stronger -harder
> > to peel). Nail varnish is good too. I've used all 3 but YMMV depending
> on
> > area of contact etc.
> >
> > HTH
> >
> > Mark
> >
> >
> > On 25/06/2012, at 4:38 PM, Tobias Rose wrote:
> >
> > > *****
> > > To join, leave or search the confocal microscopy listserv, go to:
> > >
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy> > > *****
> > >
> > > Dear all,
> > >
> > > I need to glue some glass optics onto anodized aluminum surfaces (edges
> > of coated dichroic mirror surface and of a full reflective silver
> mirror).
> > The problem is that I'd like to be able to remove the mirrors at some
> point
> > without completely ruining their reflective surfaces and leaving too much
> > residue on the glass and aluminum.
> > > The glued parts are not in the optical path so the glue does not have
> to
> > be transparent. Also the glue can be quite weak, just enough so that the
> > mirrors don't fall off.
> > >
> > > Can anyone suggest a nice glue for that?
> > >
> > > Best,
> > > Tobias
> >
>
>
>
> --
> Michael J. Herron, U of MN, Dept. of Entomology
>
[hidden email]
> 612-624-3688 (office) 612-625-5299 (FAX)
>