Posted by
Straatman, Kees (Dr.) on
URL: http://confocal-microscopy-list.275.s1.nabble.com/Aligning-large-stacks-tp7581843p7581847.html
*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopyPost images on
http://www.imgur.com and include the link in your posting.
*****
Dear Timothy,
We recently had some problems with stitching using NIS-Elements which were resolved by calibrating the stage. The info I received from our Nikon product specialist was:
"Go to the Calibration menu and objectives, there is an option on the right to recalibrate objective (ensure the correct objective is selected). In the wizard select the auto option, ensure you have a sample on the stage in focus with good detail. The software will run an autocalibrate and should then stitch correctly."
This solved the problem for us. We also noticed that after the camera was slightly turned by accident the stitching did not work properly anymore and we needed to recalibrate.
Best wishes
Kees
Dr Ir K.R. Straatman
Senior Experimental Officer
Centre for Core Biotechnology Services
University of Leicester
http://www2.le.ac.uk/colleges/medbiopsych/facilities-and-services/cbs/lite/aif-----Original Message-----
From: Confocal Microscopy List [mailto:
[hidden email]] On Behalf Of Feinstein, Timothy
Sent: 02 April 2014 19:11
To:
[hidden email]
Subject: Aligning large stacks
*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopyPost images on
http://www.imgur.com and include the link in your posting.
*****
Hello all,
We have a number of folks who routinely test the limits of our A1-RS system by collecting for example large and high-resolution atlases of clarified brains (at least the 300 um -1 mm depth that we can reach with an inverted scope). Our coded stage and a software feature in Elements lets us create 3D stacks of very large images stitched together from 16 to 100 individual images per slice.
We have found that the alignment can go slightly off from one slice to the next, screwing with our deconvolution and analysis results. This is not by itself shocking; these jobs are asking an awful lot of the system. We have the system pretty well isolated from vibration and air currents and nobody goes near it while collecting.
Elements has an alignment feature built in but it does not produce great results from very large images (e.g. 4096 ^2 and up). I have tried the registration plugins menu in Fiji and my current favorite, StackReg, can produce solid results. Rigid body registration seems to do the job most of the time. On the other hand its progress bar is not very helpful and some alignments can take overnight to all weekend, if they work.
So I thought it would help to throw this out to those of you who do this more often - do you have a favorite workflow for big-job registrations? Do you have a favorite freeware, Matlab plugin or paid option for these big jobs? Should I stop stitching the images and let the coded stage handle alignment on its own?
We use a workstation with a decent graphics card and 36 GB of RAM. We can put in a lot more if that will help.
Any advice on or off list would be appreciated.
Thanks and all the best,
TF
Timothy Feinstein, Ph.D. | Confocal Manager
333 Bostwick Ave., N.E., Grand Rapids, Michigan 49503
Phone: 616-234-5819 | Email:
[hidden email]<mailto:
[hidden email]>