Posted by
Straatman, Kees (Dr.) on
URL: http://confocal-microscopy-list.275.s1.nabble.com/laser-alignment-issue-FluoView1000-tp7584981p7584990.html
Dear Jens,
With behind the scanhead you mean no light at the objective or already at an earlier stage?
Kees
Dr Ir K.R. Straatman
Senior Experimental Officer
Advanced Imaging Facility
Centre for Core Biotechnology Services
University of Leicester
http://www2.le.ac.uk/colleges/medbiopsych/facilities-and-services/cbs/lite/aif-----Original Message-----
From: Confocal Microscopy List [mailto:
[hidden email]] On Behalf Of jens rietdorf
Sent: 04 April 2016 22:40
To:
[hidden email]
Subject: laser alignment issue FluoView1000
*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopyPost images on
http://www.imgur.com and include the link in your posting.
*****
Listers,
following the installation of a new air condition, we are not succeeding to get any light after the scanhead of our Olympus FluoView1000 CLSM. End of fiber, there is plenty of light. Behind the scanhead, no light arrives. We work with an inverted IX 81 microscope.
Unfortunately the service situation in Brazil is very poor, so if there were any suggestions how to proceed, I would rather try to check the alignment myself.
Anyone having experience with the FluoView1000 scanhead?
Thank you, Jens
Dr. Jens Rietdorf, visiting scientist @ center for technological development in health CDTS, Oswaldo Cruz Foundation Fiocruz, Rio de Janeiro Brasil.