http://confocal-microscopy-list.275.s1.nabble.com/Spinning-disk-or-new-point-scanning-confocals-for-live-imaging-of-3D-engineered-tissues-tp7590297p7590309.html
point. Over the past few years, we have delivered a few dozen of these
instruments around the world. While multi-well plates are not possible with
standard practice. From the shared experiences of the large community of
3D capture paradigm. With a ~400nm sheet, the instrument illuminates just
focus illumination/harm. If hyper gentle high-speed 3D capture is your
rig. That being said, pretty much every one of our Lattice LightSheet users
topic with care in his Discussion. (I won't quote him here, but here's the
> *****
> To join, leave or search the confocal microscopy listserv, go to:
>
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy> Post images on
http://www.imgur.com and include the link in your posting.
> *****
>
> George,
> thanks for the note re: AausFP1. I will definitively check it out.
>
> In a spectrum that goes from (slowest speed / highest 3D SNR) to (highest
> speed / lowest 3D SNR), my understanding is that MPEF < Scanning confocal <
> Spinning confocal. That is, one has to trade 3D SNR for speed and I need to
> be able to hit 100s fps in certain important applications. Am I wrong? (I
> understand AasusFP1 increased brightness with help SNR and potentially
> enable faster recordings, but I am not sure how linear that
> relationship would be given photobleaching...)
>
> Another option would be (lattice) light-sheet microscopy but I have not
> found an implementation that works well on multi-well plates. The possible
> exceptions are the 3i implementations and Luxendo QuVi but they are pretty
> untested at this point. Does anyone have any experience with these
> platforms?
>
> Thanks,
> Francesco
>
>
> On Mon, Dec 16, 2019 at 3:57 AM George McNamara <
[hidden email]
> >
> wrote:
>
> > Hi Francesco,
> >
> > since >50 um thick, think about multiphoton excitation fluorescence
> > microscopy ... second harmonic generation (some types of collagen).
> >
> > Fiber lasers that output single wavelength, typically ~100 femtoseconds,
> > 80 MHz repetition rate, are in the $10K - $60K range, each. If only one
> > microscope rig, implies point scanning (or TriMscope or similar). That
> > is, 1 or 3 lasers for potentially a lot less than a tunable Ti:Sapphire
> > laser (and could start with one fiber laser at most important wavelength
> > ... could be launched into a conventional 1p confocal scanner).
> >
> > You could have both point scanning (MPEF) and spinning disk confocal on
> > same microscope. I strongly urge investing in GPU deconvolution
> > software, optimized for each mode you will use.
> >
> > FYI - In May 2019 at JHU, Nathan Shaner (UCSD) started his talk on
> > AausFP1 -- 5x brighter than EGFP -- with a multi-day timelapse video
> > acquired at 6 min intervals (sped up on playback).
> >
> > I suggest starting to make AausFP1 constructs, amino acid sequence in
> >
https://www.biorxiv.org/content/10.1101/677344v2 (obligate dimer ... so
> > tandem dimer and/or monomerization mutation should be installed ... also
> > codon optimize). Preprint does not discuss Yellow version, should be
> > doable with one mutation (re: EGFP --> EYFP), so could have two colors.
> > Tandem dimer of G-->Y should be outstanding for FRET (3rd color).
> >
> > Also start thinking about optimized filter set(s) and/or confocal/MPEF
> > capabilities, to get the most of the narrow excitation and emission
> > peaks of AausFP1(green), AausFP1(Yellow), AausFP1(green-->Yellow).
> >
> > FYI - our Olympus FV3000RS confocal microscope worked well for GCaMP6,
> >
https://www.physiology.org/doi/abs/10.1152/ajpcell.00351.2018 (our Leica
> > SP8 confocal would have worked fine, but purchased without 37 C and
> > environmental control). Here in the U.S., the microscope vendors often
> > provide a nice trade-in credit, so I encourage asking your new place if
> > they have an old confocal to trade in toward purchase.
> >
> > best wishes,
> >
> > George
> >
> > p.s. see also current optical clearing methods for fixed specimens, and
> > expansion microscopy.
> >
> >
> > On 12/13/2019 12:18 PM, Francesco Pasqualini wrote:
> > > *****
> > > To join, leave or search the confocal microscopy listserv, go to:
> > >
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy> > > Post images on
http://www.imgur.com and include the link in your
> > posting.
> > > *****
> > >
> > > Hi,
> > > I will start my ERC-funded lab in Italy in 2020, which means I am
> > fortunate
> > > to be shopping for a confocal instrument right about now.
> > >
> > > Since I do mostly live experiments (more details below) I was going to
> > get
> > > a spinning disk system. But, I realized that the new scanning confocals
> > are
> > > also relatively fast and gentle. The question is how much (if at all)
> > > slower and harsher are they with respect to spinning disks?
> > >
> > > More details:
> > > - I do a lot of live experiments (traction force microscopy and
> > > voltage/calcium-sensitive dyes) on engineered cells (300x300 um FOV)
> and
> > > tissues (600x600 um FOV) in 2D or 3D (<300 um thick) that I complement
> > with
> > > immunostainings after fixation. Needed acquisition rates go from <1 fps
> > to
> > > 100s depending on the application.
> > >
> > > - Originally, I was oriented towards a spinning disk confocal
> > > (Yokogawa/SORA, Crest) and was looking at ways to deal with the issues
> of
> > > confocality on the 3D tissue (600x600x300 um volumes) case. But, I
> > realized
> > > all vendors have new point scanning confocal (980+Airyscan2, FV3000,
> A1R)
> > > with resonant scanners that acquire full frames/ROIs at 10s/100s of fps
> > >
> > > - Of course, structured illumination (Elyra-7, N-SIM) and light-sheet
> > > microscopes (QuVi) are also appealing but relatively untested in my
> > > applications of interests....
> > >
> > > The application specialists from all vendors in my area have been great
> > to
> > > work with but since my lab is not up and running, yet, I can't demo
> these
> > > systems directly. Therefore, I could use help and feedback, especially
> > from
> > > people who have had related experiences in the recent past.
> > >
> > > Thanks,
> > > Francesco
> > >
> >
>
>
> --
> Francesco S. Pasqualini
> Visiting Professor University of Pavia
> Associate Harvard University
>
> tel: +39 351-521-7788 (IT)
> tel: +1 617-401-5243 (USA)
>