Re: Failed RTC connection
Posted by
Arcroyal Systems on
URL: http://confocal-microscopy-list.275.s1.nabble.com/Failed-RTC-connection-tp7591048p7591049.html
*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopyPost images on
http://www.imgur.com and include the link in your posting.
*****
We can help.
Www.Arcroyal.com
________________________________
From: Confocal Microscopy List <
[hidden email]> on behalf of Prof. Dr. K. S. Krishnamurthy <
[hidden email]>
Sent: Saturday, June 27, 2020 11:52:36 PM
To:
[hidden email] <
[hidden email]>
Subject: Failed RTC connection
*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopyPost images on
http://www.imgur.com and include the link in your posting.
*****
We have a 2008 model Axioimager, coupled to an LSM5 exciter, used mainly for polarization studies on liquid crystals. Recently, the Zen software failed to launch with "fail to connect to RTC..." message. Resetting did not work. On the monitor, however, 'Real time connection connected..' message appears. It is suspected that the IDE, transcend 128 MB flash module, used to boot may have been corrupted. If a new IDE flash module is purchased, the program data will have to be written into it. Is there a way of getting the data? Since the model is out of service, local Zeiss rep has expressed inability to extend technical support. It seems such a pity that for the sake of the IDE, the instrument should remain defunct. We would be indebted for any suggestions to bring the confocal onroad.