Anti-vibration table for 510 Meta

[Shane-33]

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
*****

I'd like to purchase a new anti-vibration table for a 510 Meta system. The
new table needs to be at least 870mm high which shouldn't be a problem but I
want to keep the Meta scanhead mounted on the underside port of the Axiovert.

Does anyone know of any table that meets these requirements for hight and
access to the bvaseport?

Many thanks,

Shane

[Klughammer GmbH]

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
*****

Dear Shane,

we manufacture passive anti-vibration platforms. Is this an option for you?

With kind regards

Anneliese Schmaus LLB (hons)
Strategic Manager
____________________
Klughammer GmbH
Ulrichsberger Strasse 17
94469 Deggendorf
Germany
Tel. [phone]
Fax [phone]
[hidden email]
www.klughammer.com




2011/5/10 Shane <[hidden email]>

> *****
> To join, leave or search the confocal microscopy listserv, go to:
> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> *****
>
> I'd like to purchase a new anti-vibration table for a 510 Meta system. The
> new table needs to be at least 870mm high which shouldn't be a problem but
> I
> want to keep the Meta scanhead mounted on the underside port of the
> Axiovert.
>
> Does anyone know of any table that meets these requirements for hight and
> access to the bvaseport?
>
> Many thanks,
>
> Shane
>

[Mark Cannell]

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
*****

TMC can make whatever you want, holes in the top are not very  
expensive if I remember correctly.

Mark
On 11/05/2011, at 2:14 AM, Shane wrote:

> *****
> To join, leave or search the confocal microscopy listserv, go to:
> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> *****
>
> I'd like to purchase a new anti-vibration table for a 510 Meta  
> system. The
> new table needs to be at least 870mm high which shouldn't be a  
> problem but I
> want to keep the Meta scanhead mounted on the underside port of the  
> Axiovert.
>
> Does anyone know of any table that meets these requirements for  
> hight and
> access to the bvaseport?
>
> Many thanks,
>
> Shane

[Craig Brideau]

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
*****

I second TMC.  I have 7 of their tables and they've been working fairly
well.  I like the design of their piston legs; they damp in multiple axis.

Craig

On Tue, May 10, 2011 at 2:13 PM, Mark Cannell <[hidden email]>wrote:

> *****
> To join, leave or search the confocal microscopy listserv, go to:
> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> *****
>
> TMC can make whatever you want, holes in the top are not very expensive if
> I remember correctly.
>
> Mark
>
> On 11/05/2011, at 2:14 AM, Shane wrote:
>
>  *****
>> To join, leave or search the confocal microscopy listserv, go to:
>> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
>> *****
>>
>> I'd like to purchase a new anti-vibration table for a 510 Meta system. The
>> new table needs to be at least 870mm high which shouldn't be a problem but
>> I
>> want to keep the Meta scanhead mounted on the underside port of the
>> Axiovert.
>>
>> Does anyone know of any table that meets these requirements for hight and
>> access to the bvaseport?
>>
>> Many thanks,
>>
>> Shane
>>
>