imaging chambers for <10mm coverslip?

[RJ3]

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
Post images on http://www.imgur.com and include the link in your posting.
*****

I'm looking for something like this from Warner:
http://www.warneronline.com/product_info.cfm?id=735

Their smallest chambers work with 12mm coverslips, I was hoping to find a 8
or 10mm variant from another manufacturer. Has anyone seen one?

[Philip Nicovich]

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
Post images on http://www.imgur.com and include the link in your posting.
*****

Rafael,

We started 3D printing our sample chambers.

https://github.com/PRNicovich/BenlideChambers

Easy enough to make a new size if one was so inclined.  There are concerns
about material compatibility and longevity, but especially for fixed
samples these seem to work quite well and are cheap.

Rusty

On Fri, May 20, 2016 at 1:22 PM, Rafael Jaimes <[hidden email]> wrote:

> *****
> To join, leave or search the confocal microscopy listserv, go to:
> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> Post images on http://www.imgur.com and include the link in your posting.
> *****
>
> I'm looking for something like this from Warner:
> http://www.warneronline.com/product_info.cfm?id=735
>
> Their smallest chambers work with 12mm coverslips, I was hoping to find a 8
> or 10mm variant from another manufacturer. Has anyone seen one?
>

--

*Philip R Nicovich*

*Research Fellow,  **ARC Centre of Excellence in Advanced Molecular Imaging*



THE UNIVERSITY OF NEW SOUTH WALES

UNSW  SYDNEY  NSW  2052  AUSTRALIA

T: [phone]

E: [hidden email] <[hidden email]>


CRICOS Provider No. 00098G

[Farid Jalali]

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
Post images on http://www.imgur.com and include the link in your posting.
*****

Hi Rafael, not exactly the same but an excellent product, check the Chamlide chambers from LCI.

http://www.chamlide.com/page/company/product_list.asp?SortSeqNo=6

No commercial interest, they just work really well.

Farid.  

Sent from my iPhone

> On May 19, 2016, at 8:22 PM, Rafael Jaimes <[hidden email]> wrote:
>
> *****
> To join, leave or search the confocal microscopy listserv, go to:
> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> Post images on http://www.imgur.com and include the link in your posting.
> *****
>
> I'm looking for something like this from Warner:
> http://www.warneronline.com/product_info.cfm?id=735
>
> Their smallest chambers work with 12mm coverslips, I was hoping to find a 8
> or 10mm variant from another manufacturer. Has anyone seen one?

[Craig Brideau]

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
Post images on http://www.imgur.com and include the link in your posting.
*****

Some of the 'Biocompatible' labeled printer materials seem OK for short
term work. I've used Objet MED610 for chambers for ex-vivo preps with no
issues, but those are <24hr exposure to the material.

Craig

On Thu, May 19, 2016 at 9:59 PM, Philip Nicovich <[hidden email]>
wrote:

> *****
> To join, leave or search the confocal microscopy listserv, go to:
> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> Post images on http://www.imgur.com and include the link in your posting.
> *****
>
> Rafael,
>
> We started 3D printing our sample chambers.
>
> https://github.com/PRNicovich/BenlideChambers
>
> Easy enough to make a new size if one was so inclined.  There are concerns
> about material compatibility and longevity, but especially for fixed
> samples these seem to work quite well and are cheap.
>
> Rusty
>
> On Fri, May 20, 2016 at 1:22 PM, Rafael Jaimes <[hidden email]>
> wrote:
>
> > *****
> > To join, leave or search the confocal microscopy listserv, go to:
> > http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> > Post images on http://www.imgur.com and include the link in your
> posting.
> > *****
> >
> > I'm looking for something like this from Warner:
> > http://www.warneronline.com/product_info.cfm?id=735
> >
> > Their smallest chambers work with 12mm coverslips, I was hoping to find
> a 8
> > or 10mm variant from another manufacturer. Has anyone seen one?
> >
>
>
>
> --
>
> *Philip R Nicovich*
>
> *Research Fellow,  **ARC Centre of Excellence in Advanced Molecular
> Imaging*
>
>
>
> THE UNIVERSITY OF NEW SOUTH WALES
>
> UNSW  SYDNEY  NSW  2052  AUSTRALIA
>
> T: [phone]
>
> E: [hidden email] <[hidden email]>
>
>
> CRICOS Provider No. 00098G
>

[RJ3]

*****
To join, leave or search the confocal microscopy listserv, go to:
http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
Post images on http://www.imgur.com and include the link in your posting.
*****

Typically my samples grow on 8-10mm coverslips. I just place them in a
chamber for short-term (<6 hr) imaging and then they are discarded. I will
certainly check out that material and 3D designs.

Thanks!

- Rafael

On Fri, May 20, 2016 at 10:52 AM, Craig Brideau <[hidden email]>
wrote:

> *****
> To join, leave or search the confocal microscopy listserv, go to:
> http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> Post images on http://www.imgur.com and include the link in your posting.
> *****
>
> Some of the 'Biocompatible' labeled printer materials seem OK for short
> term work. I've used Objet MED610 for chambers for ex-vivo preps with no
> issues, but those are <24hr exposure to the material.
>
> Craig
>
> On Thu, May 19, 2016 at 9:59 PM, Philip Nicovich <[hidden email]>
> wrote:
>
> > *****
> > To join, leave or search the confocal microscopy listserv, go to:
> > http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> > Post images on http://www.imgur.com and include the link in your
> posting.
> > *****
> >
> > Rafael,
> >
> > We started 3D printing our sample chambers.
> >
> > https://github.com/PRNicovich/BenlideChambers
> >
> > Easy enough to make a new size if one was so inclined.  There are
> concerns
> > about material compatibility and longevity, but especially for fixed
> > samples these seem to work quite well and are cheap.
> >
> > Rusty
> >
> > On Fri, May 20, 2016 at 1:22 PM, Rafael Jaimes <[hidden email]>
> > wrote:
> >
> > > *****
> > > To join, leave or search the confocal microscopy listserv, go to:
> > > http://lists.umn.edu/cgi-bin/wa?A0=confocalmicroscopy
> > > Post images on http://www.imgur.com and include the link in your
> > posting.
> > > *****
> > >
> > > I'm looking for something like this from Warner:
> > > http://www.warneronline.com/product_info.cfm?id=735
> > >
> > > Their smallest chambers work with 12mm coverslips, I was hoping to find
> > a 8
> > > or 10mm variant from another manufacturer. Has anyone seen one?
> > >
> >
> >
> >
> > --
> >
> > *Philip R Nicovich*
> >
> > *Research Fellow,  **ARC Centre of Excellence in Advanced Molecular
> > Imaging*
> >
> >
> >
> > THE UNIVERSITY OF NEW SOUTH WALES
> >
> > UNSW  SYDNEY  NSW  2052  AUSTRALIA
> >
> > T: [phone]
> >
> > E: [hidden email] <[hidden email]>
> >
> >
> > CRICOS Provider No. 00098G
> >
>